此外,作為中方代表,承擔了美國美國國家自然科學基金(Developing Bridge Weigh-in-Motion (B-WIM) Health Monitoring Systems for Bridge Infrastructure Safety)(2011年-2015年)。
參編著作:
1.《橋梁設計百問》,邵旭東編著,參編6萬字,人民交通出版社,2003
2.《橋梁工程》,邵旭東主編,參編23萬字,人民交通出版社,2005
3.《橋梁工程》,邵旭東主編,參編16萬字,武漢工業大學出版社,2005
4.《專業英語(公路與城市道路工程)》,李嘉主編,參編5萬字,人民交通出版社,2003
學術論文:
1.Zhao, H., and Uddin,N., “Innovative bridge weigh-in-motion system for enforcement application”, IABSE-IASS Symposium London 2011, London, pp. 581
2.Zhao, H., and Uddin,N., “Influence line calculation of existing bridges in BWIM system”, IABSE-IASS Symposium London 2011, London, pp. 572
3.Zhao, H., Uddin, N., Waldron, C.J., and O’BRIEN, E.J., “Use of Weigh-In-Motion (WIM) Data for Site-Specific LRFR Bridge Rating”, International ConferenceonWeigh-In-Motion, ICWIM 6, Dallas, Texas, June 4 - 7, 2012
4.Shao, X.D., Jiang, W., Hu, J.H., Zhao, H., and Lu, L.Z., “Hyperbolic tower of a multi-span cable-stayed bridge”, IABSE-IASS Symposium London 2011, London, pp. 276
5.Shao, X.D., Yi, D.T., Huang, Z.Y., Zhao, H., Chen, B., and Liu, M.L, “The Basic Performance of the Composite Deck System Composed of Orthotropic Steel Deck and Ultra-thin RPC Layer ”, ASCE, Journal of Bridge Engineering, (corresponding author)(accepted for publication in Nov, 2011)
6.Zhao, H., and Uddin,N., “Algorithm to identify axle weights for an innovative BWIM system- Part I”, Advances in Bridge Engineering-II, 8-10 August, 2010, Dhaka, Bangladesh, pp.527-536
7.Zhao, H., and Uddin,N., “Algorithm to identify axle weights for an innovative BWIM system- Part II”, Advances in Bridge Engineering-II, 8-10 August, 2010, Dhaka, Bangladesh, pp.537-546
8.Shao, X.D., Wang, H.L., Zhao, H. and Chang, Y., “Experimental study on multi-cantilever prestressed composite beams with corrugated steel webs”, ASCE, J. of Structural Eng., , Vol. 136, No. 9, September 2010, pp. 1098-1110
9.Shao, X.D., Yang, J.J., Zhao, H., Zhou, Y.D., and Nie, M.C., “Experimental Research on and Application of Twice-Prestressed Concrete Beam”, Advances in Structural Engineering, Vol. 13, No. 2, April 2010, pp. 321-330
10.Zhao, H., Uddin, N., Hitchcock, W.A., Salama, T. and Abd-El-Meguid, A.S., “Bridge repair and maintenance with bridge weight-in-motion: A case study with bridge on highway I-459”, Structural Faults & Repair-2008, June 2008, Edinburgh, Edinburgh, UK
11.Zhao, H., Uddin, N., Hitchcock, W.A., Salama, T. and Abd-El-Meguid, A.S., “Innovative bridge weigh-in-motion system for bridge maintenance: A case study with bridge on highway I-59” 10th International Bridge and Structure Management Conference, Buffalo, New York, Transportation Research Board, October 2008, pp. 369-383
12.Shao, X.D., Zhao, H., Li, L.F., Peng, W.H., Liu, G.D. and Yan, B.F., “Design and experimental study of a harp shaped single span cable-stayed bridge”, ASCE, Journal of Bridge Engineering, Vol.10, No.6, Nov. 2005, pp.658-665
13.Yamakawa, T. and Zhao, H., “Experimental and analytical investigation of seismic retrofit for RC framed shear walls by hybrid techniques”, ASCCS, China, pp.811-817, Aug, 2006
14.Zhao, H. and Yamakawa, T., “Cyclic loading test on retrofitted RC framed shear walls”, AIJ Kyushu Chapter Architectural Research Meeting (Structure), Fukoka, Japan, pp.361-364, Mar, 2006
15.Zhao, H.,Shao, X.D., Qin, J.J., Li, L.F. and Peng, W.H., “The Design and experimental study of the steel-concrete composite box girder of a harp-shaped single span cable-stayed bridge”, the fourth Inter. Conf. on Advances in Steel Structures, Shanghai, China, June 2005, pp1633-1638
16.Zhao, H., Shao, X.D., Liu, G.D., Chen, M.X. and Zhu, P., “Analysis of ultimate load bearing capacity of reinforced concrete arch bridges”, IABSE, Shanghai, China, Sept. 2004, (paper No. SHA103)