期 刊-> 郭盛,劉建.Experimental research on air film formation behavior of air cushion belt conveyor with stable load[J]。SCIENCE CHINA Technological Sciences,2013-06,56(6),1424:1434
期 刊-> 郭盛,方躍法.A novel 4-RRCR parallel mechanism based on screw theory and its kinematics analysis[J]。Proc IMechE Part C: J Mechanical Engineering Science,2013-09,227(9),2039:2048
期 刊-> 郭盛.基于數值模擬的懸浮式物料輸送系統氣孔設計方法研究[J]。高技術通訊,2013-06,23(6),648:653
期 刊-> 郭盛.基于綜合環境控制的室內變電站通風方式[J]。北京交通大學學報,2013-06,37(3),19:26
期 刊-> 曲海波,方躍法,郭盛.新型3-UPU平移并聯機構的設計與奇異分析[J]。高技術通訊,2012-07,7(22),741:746
期 刊-> 曲海波,方躍法,郭盛.Parasitic Rotation Evaluation and Avoidance of 3-UPU Parallel Mechanism[J]。 Frontiers of Mechanical Engineering,2012-02,2(7),210:218
期 刊-> 郭盛,方躍法,王乃玥.基于概率的4自由度UPU并聯機構誤差敏感性分析[J]。高技術通訊,2012-06,22(6),644:650
期 刊-> 郭盛,方躍法,曲海波,汪從哲.THE DOF DEGENERATION CHARACTERISTICS OF CLOSED LOOP OVERCONSTRAINED MECHANISMS[J]。Transactions of the Canadian Society for Mechanical Engineering,2012-01,36(1),67:82
期 刊-> 郭盛,方躍法,房海蓉.美國UCI大學機械原理教學的啟示[J]。哈爾濱工業大學學報(社科版),2011-06,13(增1),81:82
期 刊-> 郭盛,方躍法,曲海波.Type synthesis of 4-DOF nonoverconstrained parallel mechanisms based on screw theory[J]。Robotica,2012-01,30(01),31:37
期 刊-> 郭盛,王乃玥,方躍法.基于概率分布的3-UPU機構誤差影響敏感度[J]。機械工程學報,2011-10,47(19),143:150
期 刊-> 曲海波,方躍法,郭盛.A new method for isotropic analysis of limited DOF parallel manipulators with terminal constraints[J]。Robotica,2011-07,29(4),563:569
期 刊-> 郭盛,方躍法.單閉環一自由度過約束機構解析綜合[J]。中國機械工程,2009-12,20(04),
期 刊-> 郭盛,方躍法.基于等效并聯機構的四足步行機器人運動分析[J]。高技術通訊,2009-12,19(4),
期 刊-> 郭盛,方躍法.基于螺旋理論的單閉環多自由度過約束機構綜合[J]。機械工程學報,2009-12,45(11),
期 刊-> 郭盛,方躍法.可實現空間取放作業的4自由度并聯機器人機構綜合[J]。機器人,2007-12,29(5),
期 刊-> 郭盛,方躍法.避免平臺奇異的三自由度平動并聯機器人設計方法[J]。兵工學報,2007-12,28(8),
期 刊-> 郭盛,方躍法.并聯機器人機構綜合方法比較研究[J]。北方交通大學學報,2007-12,31(第一期),
會議論文-> 曲海波,方躍法,郭盛.Motion Analysis of an Oriented Parallel Mechanism。The 3rd International Conference on Mechanic Automation and Control Engineering,內蒙古,1610:1610,2012-08
會議論文-> 郭盛,王乃玥,方躍法.Study on Error Sensibility of UPU Parallel Manipulator Based on Probability Distribution。International Conference on Mechatronics and Automation August 7 - 10, Beijing, China,北京,2045:2045,2011-08
會議論文-> 王乃玥,郭盛,方躍法.Error Sensibility Analysis of 3-UPU Parallel Manipulator Based on Probability Distribution。 Mechatronics and Automation (ICMA), 2011 International Conference on 7-10 Aug. 2011, Inner Mongolia, China,內蒙古呼和浩特,1296:1296,2011-08
會議論文-> 郭盛,方躍法.Constraints Analysis in the Motion Control Process of parallel Robots。第26屆中國控制會議,張家界,2007-12 專利